Waiver of Responsibility:
Please, be informed that Kazmierczak Software GmbH and BackToCAD Technologies LLC provides PDF, HPGL, DWF, TIFF, JPEG or EPS to DWG or DXF conversion technology with Print2CAD™ Converter for personal use only, not for copyrighted materials you are not the owner of. Kazmierczak Software GmbH and BackToCAD Technologies LLC waive any responsibility for possible copyright infringements.
License Conditions: Please read the following terms and conditions carefully before you use the program for the first
time. If you have not signed any written licensing agreement with
BackToCAD Technologies LLC, you declare your consent to the
provisions of this licensing agreement by using or installing this
copy of Print2CADT Converter. If
you are not in agreement with any of the provisions stated here,
you may not install, use or pass on this copy of Print2CAD™ Converter.
You as the End Licensee
agree to the following terms and restrictions:
The transfer module of Print2CAD™ Convertermay be installed and used on one computer only. It
may not be installed on multiple computers used by different people
simultaneously.
End Licensee agree not to alter, reverse engineer
or disassemble the Software Application. End Licensee will not copy
the Licensed Software except: (i) as necessary to read the Software
Application from the media into the memory of a computer solely for
the purpose of executing it on a single machine (whether a stand
alone computer or a workstation component of a multi-terminal
system), or (ii) to create an archival copy. End Licensee agree
that any such copies of the Software Application shall contain the
same proprietary notices which appear on and in the Software
Application.
End Licensee may not install, access or otherwise
copy or use the Software Application except as expressly authorized
by this Agreement. End Licensee may not distribute, rent, loan,
lease, sell, sublicense, or otherwise transfer all or any portion
of the Software Application, or any rights granted in this
Agreement, to any other person without the prior written consent of
Licensee. End Licensee may not install or access, or allow the
installation or access of, the Software Application over the
Internet for the purposes of making the Software Application
available to third parties, including, without limitation, use in
connection with a Web hosting or similar services. End Licensee may
not modify, translate, adapt, arrange, or create derivative works
based on the Software Application for any purpose. End Licensee may
not utilize any equipment, device, software, or other means
designed to circumvent or remove any form of copy protection used
by Licensee or its licensors in connection with the Software
Application, or use the Software Application together with any,
authorization code, serial number, or other copy protection device
not supplied by Licensee or its licensors. End Licensee may not use
or export the Software Application outside of the country of
purchase for any reason. End Licensee acknowledge that the Software
Application is the confidential information of Licensee and its
suppliers, and End Licensee agree that under no circumstances may
they disclose the Software Application to any third party. Title to
and ownership of the intellectual property rights associated with
the Software Application and any copies remain with Licensee and
its suppliers.
End Licensee are hereby notified that Autodesk
Development S.a.r.l.., Rue du Puits-Godet, 6, CH-2005 Neuchatel,
Switzerland (“Autodesk”) is a third-party beneficiary
to this Agreement to the extent that this Agreement contains
provisions which relate to End Licensee use of the Software
Application. Such provisions are made expressly for the benefit of
Autodesk and are enforceable by Autodesk in addition to
Licensee.
End Licensee are hereby notified that
Kazmierczak Software GmbH, Filderstadt, Germany,
is a third-party beneficiary to this Agreement to the extent that
this Agreement contains provisions which relate to End Licensee use
of the Software Application. Such provisions are made expressly for
the benefit of Kazmierczak Software GmbH and are enforceable by
Kazmierczak Software GmbH in addition to Licensee.
In no event shall Licensee or its suppliers be
liable in any way for indirect, special or consequential damages of
any nature, including without limitation, lost business profits, or
liability or injury to third persons, whether foreseeable or not,
regardless of whether Licensee or its suppliers have been advised
of the possibility of such damages.
You are not entitled to loan, rent, nor to use it
as the basis for software programs of your own.
BackToCAD Technologies LLC expressly forbids the
use of Print2CAD™ Converter in applications or systems
in which, as far as it is possible to judge, malfunctions of this
software can be expected to cause physical damage or injury
resulting in death. You may only use the program in an environment
of this kind at your own risk. BackToCAD
Technologies LLC shall not assume any liability whatsoever
for damages or losses due to such prohibited use.
A guarantee shall only be granted for faults
claimed within six (6) months of the purchase of this Print2CAD™ Converter License. Obvious defects in the software must be
specified within four (4) weeks of their discovery. If the software
is defective, BackToCAD Technologies
LLC shall be entitled, at its own discretion, to either
supply a replacement or return the purchasers money.
You are strongly advised to test new software
thoroughly in an uncritical environment before putting it to actual
use. You shall bear the entire risk of being able to use the
program for your intended purpose.
The District Court of Atlanta, Georgia shall have
exclusive jurisdiction over any and all disputes arising from or
related to this contract. Only substantive German law shall be
applicable to this contract.
The Print2CAD™ Converter may not be made available to
third parties who have connections to a data conversion service
provider, an applications service provider or similar company; nor
may it be used in a company for the purpose of offering services to
third parties in the area of data conversion.
The rights granted to you by this License shall
not imply that any rights are granted to third parties.
